Diametric boosts productivity, efficiency and diversity with Kongsberg X20

August 04, 2022
UK branding specialist is passing on cost savings to customers within weeks of installation UK branding specialist is passing on cost savings to customers within weeks of installation

After introducing its new Kongsberg digital cutting table, branding specialist Diametric saw a boost in productivity with extensive efficiency gains and was able to pass on cost savings to customers.

The precision badge, label, and nameplate producer recently acquired the Kongsberg X20 as part of a strategic upgrade at the company’s manufacturing plant on the Isle of Wight. Graham Steele, Managing Director of Diametric, said that the digital cutting solution was already delivering a significant return on investment.

“It’s totally exceeded expectations, and really opened our eyes to the possibilities,” stated Graham. “We knew there was a need for new technology because the cut shop has always been a bit of a bottleneck for production, so understanding the capacity of what we can actually put through has been a revelation.

“Whenever you get a new piece of equipment there’s always the anticipation of how it will fit into the existing workflow process, but once the engineer had been in to deliver the training, the machine has not stopped!”

Graham said the Kongsberg X20, the most versatile cutting table on the market, had an immediate impact on productivity and efficiency. “The instant advantage we saw was the minimal setup time required, particularly for repeat orders, where you can recall the programming,” he explained. “Then there’s the accelerated running time. Because you can index cut on the X20, where the only limitation is the sheet size, we can also look at a larger yield on the sheet without worrying about registration issues. Previously we’d have had to do a lower yield cut because we had to be conscious of the fact the cut needed to be accurate across the whole sheet. But with Kongsberg automation, we can maximize our materials.”

“We’re also bringing costs down for customers because we can get the job through the department at a faster rate, as well as cutting more products from one sheet,” he said. “Pre-Covid, we ran an extensive secret shopper exercise and discovered that our setup costs and tooling were proving an issue. Now we’ve brought the Kongsberg in, we’ve eliminated a lot of those costs. We’re already passing those savings on to our customers, which has opened the door to some without the same budget as large international brands, but now with the option of good quality branding on their products.”

Graham has been with Diametric for 21 years. He joined as a sales account manager and progressed through the business before successfully leading an MBO to become managing director six years ago. “Previously there hadn’t been much investment in the manufacturing plant, so when we bought the company that was something we were keen to do,” said Graham. “Technology has moved on so far and fast that when we did come to invest, we’ve seen a massive improvement and very quick ROI.”

Graham Steele using the new Kongsberg X20 at Diametric

Celebrating its 40th year in business, Diametric offers complete branding solutions. With cutting edge badge, label, and nameplate production technologies, it delivers all branding requirements for a host of national and international customers.

“Our cut shop has two full time operators, and most of our cuts would previously go through a manual process,” said Graham. “To move those onto the Kongsberg meant a new way of working. Our production manager has taken the lead and is passing on the training to the two operators. That’s what is great about the X20 - it’s a very intuitive machine. It’s one thing to upgrade the systems in the cut shop, but it’s another for people to learn it and understand its capabilities. But the team have gotten on board very quickly and are confidently running production. It fits our business model exactly.”

Graham explained that when looking for the new equipment, the company identified appropriate machines and then effectively gave them a road test with the materials that the business use regularly. “Our industry sits apart from others,” he said. “Everything we were looking at for cutting was for foam, board, or packaging, whereas we manufacture product branding, so we have myriad of materials on the shelf at any one time. We needed something that could handle most materials, meeting the requirements of what we do.

“The build quality really stood out. When you saw the Kongsberg machine it was evident it was built to last,” he added. “For us, that robustness, the fact that it was a little weightier, made it the clear choice. It meant we knew it could hold its own with the materials we were using without pushing the limits of the machine.”

Graham said the versatility of the machine also enables Diametric to move into different fields. “Traditionally we work predominantly with plastics – materials like 80-micron vinyl and polycarbonates - but the Kongsberg allows us to use a greater selection of materials and also look at routing our products,” he added. “Our client base sees us as an innovative company. So for a lot of the product designers, if they are working on a project and they want to add something special for the customer, it’s our phone that tends to ring to look for a solution. Now, we can take on a wider variety of materials to further support our customers.”

“We have a remarkably diverse client base, so we are also looking to meet their needs in terms of packaging, protective inserts, and any other requirements we identify. With investment in this innovative technology, we are confident we can grow our business further.”

For further information on Diametric, please visit www.diametric.co.uk.

Share or Email this content
Graphic Display World

Email us your news, PR, case studies to [email protected]

Roland DG (UK) Ltd - VersaUV Double Your Profits
FESPA Global Expo 2023 Opens In... May 23, 2023 10:00 am 276
The Print Show 2022 Opens In... September 20, 2022 10:00 am 31
PRINTING United Expo 2022 Opens In... October 19, 2022 10:00 am 60
Sign & Digital UK 2023 Opens In... March 21, 2023 10:00 am 213
Your 300 x 300 Banner Here
drupa 2024 Opens In... May 28, 2024 10:00 am 647

The UK's coolest wide format printing trade press website specialising in providing punchy and concise up-to-the-minute news, views and industry opinions ...

Latest News

Sustainability showcase for large format printing

Sustainability showcase f…

Aug 18, 2022 Rate: 0.00

New Kongsberg PCS online store simplifies and speeds up replacement of consumables

New Kongsberg PCS online …

Aug 18, 2022 Rate: 0.00

Hybrid Services to showcase new Mimaki print technology at The Print Show 2022

Hybrid Services to showca…

Aug 18, 2022 Rate: 0.00

PRINTING United Alliance names students selected for annual Scholarship Award Program for the 2022-23 academic year

PRINTING United Alliance …

Aug 18, 2022 Rate: 0.00

Sign & Digital UK back for 2023 with a new look

Sign & Digital UK bac…

Aug 17, 2022 Rate: 0.00

Featured News

RadWraps, Phototex and ColourShield provide dementia-friendly graphics installations

RadWraps, Phototex and Co…

Aug 16, 2022 Rate: 0.00

SkinzWraps races ahead with Drytac for Gas Monkey Garage wall graphics project

SkinzWraps races ahead wi…

Aug 04, 2022 Rate: 0.00

Agfa-Gevaert to acquire Inca Digital Printers, taking a significant step in its digital printing business

Agfa-Gevaert to acquire I…

Apr 20, 2022 Rate: 0.00

Phototex is sustainable solution for wall decorations

Phototex is sustainable s…

Apr 19, 2022 Rate: 0.00

Type One Style gains versatility and economy with the VersaUV LEC2-330 printer

Type One Style gains vers…

Feb 23, 2022 Rate: 0.00

Features/Applications

RadWraps, Phototex and ColourShield provide dementia-friendly graphics installations

RadWraps, Phototex and Co…

Aug 16, 2022 Rate: 0.00

Global Printing Enterprises brings ‘FRIENDS™ Experience’ to life with Drytac ReTac Smooth 150

Global Printing Enterpris…

Aug 09, 2022 Rate: 0.00

SkinzWraps races ahead with Drytac for Gas Monkey Garage wall graphics project

SkinzWraps races ahead wi…

Aug 04, 2022 Rate: 0.00

MacroArt’s collaboration with one of River Island’s key charity partners helps bring Newlife to the high street

MacroArt’s collaboration …

Aug 02, 2022 Rate: 0.00

Minoh gets creative with Drytac ReTac Textures Linen in eye-catching wall graphics project

Minoh gets creative with …

Jul 11, 2022 Rate: 0.00

Your 1100 x 100 Banner Here

SEARCH